From 7380dc02563989a6b389af1bd01d4e4d09bf7187 Mon Sep 17 00:00:00 2001 From: Fristi Date: Thu, 28 Jul 2022 10:19:32 +0000 Subject: [PATCH] Added installation guides for redhat linux distributions, includes OTP build guide for fedora. (#122) Reviewed-on: https://akkoma.dev/AkkomaGang/akkoma/pulls/122 Co-authored-by: Fristi Co-committed-by: Fristi --- docs/docs/installation/fedora_based_en.md | 197 +++++++++++++++ docs/docs/installation/otp_en.md | 1 + docs/docs/installation/otp_redhat_en.md | 285 ++++++++++++++++++++++ 3 files changed, 483 insertions(+) create mode 100644 docs/docs/installation/fedora_based_en.md create mode 100644 docs/docs/installation/otp_redhat_en.md diff --git a/docs/docs/installation/fedora_based_en.md b/docs/docs/installation/fedora_based_en.md new file mode 100644 index 000000000..5129db80f --- /dev/null +++ b/docs/docs/installation/fedora_based_en.md @@ -0,0 +1,197 @@ +# Installing on Fedora + +## OTP releases and RedHat-distributions + +While the OTP releases of Akkoma work on most Linux distributions, they do not work correctly with RedHat-distributions. Therefore from-source installations are the recommended way to go when trying to install Akkoma on Fedora, Centos Stream or RedHat. + +However, it is possible to compile your own OTP release of Akkoma for RedHat. Keep in mind that this has a few drawbacks, and has no particular advantage over a from-source installation, since you'll need to install Erlang and Elixir anyway. + +This guide will cover a from-source installation. For instructions on how to build your own OTP release, please check out [the OTP for RedHat guide](./otp_redhat_en.md). + +## Installation + +This guide will assume you are on Fedora 36. This guide should also work with current releases of Centos Stream and RedHat, although it has not been tested yet. It also assumes that you have administrative rights, either as root or a user with [sudo permissions](https://docs.fedoraproject.org/en-US/quick-docs/adding_user_to_sudoers_file/). If you want to run this guide with root, ignore the `sudo` at the beginning of the lines, unless it calls a user like `sudo -Hu akkoma`; in this case, use `su -s $SHELL -c 'command'` instead. + +{! installation/generic_dependencies.include !} + +### Prepare the system + +* First update the system, if not already done: + +```shell +sudo dnf upgrade --refresh +``` + +* Install some of the above mentioned programs: + +```shell +sudo dnf install git gcc g++ make cmake file-devel postgresql postgresql-contrib +``` + +### Install Elixir and Erlang + +* Install Elixir and Erlang: + +```shell +sudo dnf install elixir erlang-os_mon erlang-eldap erlang-xmerl erlang-erl_interface erlang-syntax_tools +``` + + +### Optional packages: [`docs/installation/optional/media_graphics_packages.md`](../installation/optional/media_graphics_packages.md) + +* Install ffmpeg (requires setting up the RPM-fusion repositories): + +```shell +sudo dnf -y install https://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm +sudo dnf -y install https://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-$(rpm -E %fedora).noarch.rpm +sudo dnf install ffmpeg +``` + +* Install ImageMagick and ExifTool for image manipulation: + +```shell +sudo dnf install Imagemagick perl-Image-ExifTool +``` + + + +### Install AkkomaBE + +* Add a new system user for the Akkoma service: + +```shell +sudo useradd -r -s /bin/false -m -d /var/lib/akkoma -U akkoma +``` + +**Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell. + +* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory: + +```shell +sudo mkdir -p /opt/akkoma +sudo chown -R akkoma:akkoma /opt/akkoma +sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma +``` + +* Change to the new directory: + +```shell +cd /opt/akkoma +``` + +* Install the dependencies for Akkoma and answer with `yes` if it asks you to install `Hex`: + +```shell +sudo -Hu akkoma mix deps.get +``` + +* Generate the configuration: `sudo -Hu akkoma MIX_ENV=prod mix pleroma.instance gen` + * Answer with `yes` if it asks you to install `rebar3`. + * This may take some time, because parts of akkoma get compiled first. + * After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`. + +* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances): + +```shell +sudo -Hu akkoma mv config/{generated_config.exs,prod.secret.exs} +``` + + +* The previous command creates also the file `config/setup_db.psql`, with which you can create the database: + +```shell +sudo -Hu postgres psql -f config/setup_db.psql +``` + +* Now run the database migration: + +```shell +sudo -Hu akkoma MIX_ENV=prod mix ecto.migrate +``` + +* Now you can start Akkoma already + +```shell +sudo -Hu akkoma MIX_ENV=prod mix phx.server +``` + +### Finalize installation + +If you want to open your newly installed instance to the world, you should run nginx or some other webserver/proxy in front of Akkoma and you should consider to create a systemd service file for Akkoma. + +#### Nginx + +* Install nginx, if not already done: + +```shell +sudo dnf install nginx +``` + +* Setup your SSL cert, using your method of choice or certbot. If using certbot, first install it: + +```shell +sudo dnf install certbot +``` + +and then set it up: + +```shell +sudo mkdir -p /var/lib/letsencrypt/ +sudo certbot certonly --email -d --standalone +``` + +If that doesn’t work, make sure, that nginx is not already running. If it still doesn’t work, try setting up nginx first (change ssl “on” to “off” and try again). + +--- + +* Copy the example nginx configuration and activate it: + +```shell +sudo cp /opt/akkoma/installation/nginx/akkoma.nginx /etc/nginx/conf.d/akkoma.conf +``` + +* Before starting nginx edit the configuration and change it to your needs (e.g. change servername, change cert paths) +* Enable and start nginx: + +```shell +sudo systemctl enable --now nginx.service +``` + +If you need to renew the certificate in the future, uncomment the relevant location block in the nginx config and run: + +```shell +sudo certbot certonly --email -d --webroot -w /var/lib/letsencrypt/ +``` + +#### Other webserver/proxies + +You can find example configurations for them in `/opt/akkoma/installation/`. + +#### Systemd service + +* Copy example service file + +```shell +sudo cp /opt/akkoma/installation/akkoma.service /etc/systemd/system/akkoma.service +``` + +* Edit the service file and make sure that all paths fit your installation +* Enable and start `akkoma.service`: + +```shell +sudo systemctl enable --now akkoma.service +``` + +#### Create your first user + +If your instance is up and running, you can create your first user with administrative rights with the following task: + +```shell +sudo -Hu akkoma MIX_ENV=prod mix pleroma.user new --admin +``` + +#### Further reading + +{! installation/further_reading.include !} + +{! support.include !} diff --git a/docs/docs/installation/otp_en.md b/docs/docs/installation/otp_en.md index 5ae626bba..e746bbac4 100644 --- a/docs/docs/installation/otp_en.md +++ b/docs/docs/installation/otp_en.md @@ -6,6 +6,7 @@ This guide covers a installation using an OTP release. To install Akkoma from so ## Pre-requisites * A machine running Linux with GNU (e.g. Debian, Ubuntu) or musl (e.g. Alpine) libc and `x86_64`, `aarch64` or `armv7l` CPU, you have root access to. If you are not sure if it's compatible see [Detecting flavour section](#detecting-flavour) below +* For installing OTP releases on RedHat-based distros like Fedora and Centos Stream, please follow [this guide](./otp_redhat_en.md) instead. * A (sub)domain pointed to the machine You will be running commands as root. If you aren't root already, please elevate your priviledges by executing `sudo su`/`su`. diff --git a/docs/docs/installation/otp_redhat_en.md b/docs/docs/installation/otp_redhat_en.md new file mode 100644 index 000000000..2e6b58c9e --- /dev/null +++ b/docs/docs/installation/otp_redhat_en.md @@ -0,0 +1,285 @@ +# Installing on RedHat using OTP releases + +## OTP releases and Fedora/RedHat + +The current OTP builds available for Linux are unfortunately incompatible with RedHat Linux distributions, like Fedora and Centos Stream. This is due to RedHat maintaining patched versions of certain Erlang libraries, making them incompatible with other Linux distributions. + +However, you may compile your own OTP release from scratch. This is particularly useful if you wish to quickly distribute your OTP build onto multiple systems, without having to worry about compiling code on every system. However, if your goal is to simply set up a single instance for yourself, installing from-source might be a simpler option. To install from-source, please follow [this guide](./fedora_based_en.md). + + +## Pre-requisites + +In order to compile a RedHat-compatible OTP release, you will need to run a RedHat Linux distribution. This guide will assume you run Fedora 36, though it should also work on older Fedora releases and other RedHat distributions. It also assumes that you have administrative rights and sufficient knowledge on how to perform common CLI tasks in Linux. If you want to run this guide with root, ignore the `sudo` at the beginning of the lines. + +Important: keep in mind that you must build your OTP release for the specific RedHat distribution you wish to use it on. A build on Fedora will only be compatible with a specific Fedora release version. + + +## Building an OTP release for Fedora 36 + +### Installing required packages + +* First, update your system, if not already done: + +```shell +sudo dnf upgrade --refresh +``` + +* Then install the required packages to build your OTP release: + +```shell +sudo dnf install git gcc g++ erlang elixir erlang-os_mon erlang-eldap erlang-xmerl erlang-erl_interface erlang-syntax_tools make cmake file-devel +``` + + +### Preparing the project files + +* Git clone the AkkomaBE repository. This can be done anywhere: + +```shell +cd ~ +git clone https://akkoma.dev/AkkomaGang/akkoma.git +``` + +* Change to the new directory: + +```shell +cd ./akkoma +``` + + +### Building the OTP release + +* Run the following commands: + +```shell +export MIX_ENV=prod +echo "import Config" > config/prod.secret.exs +mix local.hex --force +mix local.rebar --force +mix deps.get --only prod +mkdir release +mix release --path release +``` + +Note that compiling the OTP release will take some time. Once it completes, you will find the OTP files in the directory `release`. + +If all went well, you will have built your very own Fedora-compatible OTP release! You can now pack up the files in the `release` directory and deploy them to your other Fedora servers. + + +## Installing the OTP release + +Installing the OTP release from this point onward will be very similar to the regular OTP release. This guide assumes you will want to install your OTP package on other systems, so additional pre-requisites will be listed below. + +Please note that running your own OTP release has some minor caveats that you should be aware of. They will be listed below as well. + + +### Installing required packages + +Other than things bundled in the OTP release Akkoma depends on: + +* curl (to download the release build) +* ncurses (ERTS won't run without it) +* PostgreSQL (also utilizes extensions in postgresql-contrib) +* nginx (could be swapped with another reverse proxy but this guide covers only it) +* certbot (for Let's Encrypt certificates, could be swapped with another ACME client, but this guide covers only it) +* libmagic/file + +First, update your system, if not already done: + +```shell +sudo dnf upgrade --refresh +``` + +Then install the required packages: + +```shell +sudo dnf install curl ncurses postgresql postgresql-contrib nginx certbot file-devel +``` + + +### Optional packages: [`docs/installation/optional/media_graphics_packages.md`](../installation/optional/media_graphics_packages.md) + +* Install ffmpeg (requires setting up the RPM-fusion repositories): + +```shell +sudo dnf -y install https://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm +sudo dnf -y install https://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-$(rpm -E %fedora).noarch.rpm +sudo dnf install ffmpeg +``` + +* Install ImageMagick and ExifTool for image manipulation: + +```shell +sudo dnf install Imagemagick perl-Image-ExifTool +``` + + +### Configuring PostgreSQL +#### (Optional) Performance configuration +It is encouraged to check [Optimizing your PostgreSQL performance](../configuration/postgresql.md) document, for tips on PostgreSQL tuning. + +Restart PostgreSQL to apply configuration changes: + +```shell +sudo systemctl restart postgresql +``` + +### Installing Akkoma +```sh +# Create a Akkoma user +adduser --system --shell /bin/false --home /opt/akkoma akkoma + +# Move your custom OTP release to the home directory +sudo -Hu akkoma mv /your/custom/otp/release /opt/akkoma + +# Create uploads directory and set proper permissions (skip if planning to use a remote uploader) +# Note: It does not have to be `/var/lib/akkoma/uploads`, the config generator will ask about the upload directory later + +sudo mkdir -p /var/lib/akkoma/uploads +sudo chown -R akkoma /var/lib/akkoma + +# Create custom public files directory (custom emojis, frontend bundle overrides, robots.txt, etc.) +# Note: It does not have to be `/var/lib/akkoma/static`, the config generator will ask about the custom public files directory later +sudo mkdir -p /var/lib/akkoma/static +sudo chown -R akkoma /var/lib/akkoma + +# Create a config directory +sudo mkdir -p /etc/akkoma +sudo chown -R akkoma /etc/akkoma + +# Run the config generator +sudo -Hu akkoma ./bin/pleroma_ctl instance gen --output /etc/akkoma/config.exs --output-psql /tmp/setup_db.psql + +# Create the postgres database +sudo -Hu postgres psql -f /tmp/setup_db.psql + +# Create the database schema +sudo -Hu akkoma ./bin/pleroma_ctl migrate + +# Start the instance to verify that everything is working as expected +sudo -Hu akkoma ./bin/pleroma daemon + +# Wait for about 20 seconds and query the instance endpoint, if it shows your uri, name and email correctly, you are configured correctly +sleep 20 && curl http://localhost:4000/api/v1/instance + +# Stop the instance +sudo -Hu akkoma ./bin/pleroma stop +``` + + +### Setting up nginx and getting Let's Encrypt SSL certificaties + +#### Get a Let's Encrypt certificate + +```shell +certbot certonly --standalone --preferred-challenges http -d yourinstance.tld +``` + +#### Copy Akkoma nginx configuration to the nginx folder + +```shell +cp /opt/akkoma/installation/nginx/akkoma.nginx /etc/nginx/conf.d/akkoma.conf +``` + +#### Edit the nginx config +```shell +# Replace example.tld with your (sub)domain (replace $EDITOR with your editor of choice) +sudo $EDITOR /etc/nginx/conf.d/akkoma.conf + +# Verify that the config is valid +sudo nginx -t +``` +#### Start nginx + +```shell +sudo systemctl start nginx +``` + +At this point if you open your (sub)domain in a browser you should see a 502 error, that's because Akkoma is not started yet. + + +### Setting up a system service + +```shell +# Copy the service into a proper directory +cp /opt/akkoma/installation/akkoma.service /etc/systemd/system/akkoma.service + +# Edit the service file and make any neccesary changes +sudo $EDITOR /etc/systemd/system/akkoma.service + +# If you use SELinux, set the correct file context on the pleroma binary +sudo semanage fcontext -a -t init_t /opt/akkoma/bin/pleroma +sudo restorecon -v /opt/akkoma/bin/pleroma + +# Start akkoma and enable it on boot +sudo systemctl start akkoma +sudo systemctl enable akkoma +``` + +If everything worked, you should see a response from Akkoma-BE when visiting your domain. You may need to install frontends like Akkoma-FE and Admin-FE; refer to [this guide](../administration/CLI_tasks/frontend.md) on how to install them. + +If that didn't happen, try reviewing the installation steps, starting Akkoma in the foreground and seeing if there are any errrors. + +{! support.include !} + +## Post installation + +### Setting up auto-renew of the Let's Encrypt certificate + +```shell +# Create the directory for webroot challenges +sudo mkdir -p /var/lib/letsencrypt + +# Uncomment the webroot method +sudo $EDITOR /etc/nginx/conf.d/akkoma.conf + +# Verify that the config is valid +sudo nginx -t + +# Restart nginx +sudo systemctl restart nginx + +# Ensure the webroot menthod and post hook is working +sudo certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --dry-run --post-hook 'systemctl reload nginx' + +# Add it to the daily cron +echo '#!/bin/sh +certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --post-hook "systemctl reload nginx" +' > /etc/cron.daily/renew-akkoma-cert +sudo chmod +x /etc/cron.daily/renew-akkoma-cert + +# If everything worked the output should contain /etc/cron.daily/renew-akkoma-cert +sudo run-parts --test /etc/cron.daily +``` + + +## Create your first user and set as admin +```shell +cd /opt/akkoma +sudo -Hu akkoma ./bin/pleroma_ctl user new joeuser joeuser@sld.tld --admin +``` +This will create an account withe the username of 'joeuser' with the email address of joeuser@sld.tld, and set that user's account as an admin. This will result in a link that you can paste into the browser, which logs you in and enables you to set the password. + +## Further reading + +### Caveats of building your own OTP release + +There are some things to take note of when your are running your own OTP builds. + +#### Updating your OTP builds + +Using your custom OTP build, you will not be able to update the installation using the `pleroma_ctl update` command. Running this command would overwrite your install with an OTP release from the main Akkoma repository, which will break your install. + +Instead, you will have to rebuild your OTP release every time there are updates, then manually move it to where your Akkoma installation is running, overwriting the old OTP release files. Make sure to stop the Akkoma-BE server before overwriting any files! + +After that, run the `pleroma_ctl migrate` command as usual to perform database migrations. + + +#### Cross-compatibility between RedHat distributions + +As it currently stands, your OTP build will only be compatible for the specific RedHat distribution you've built it on. Fedora builds only work on Fedora, Centos builds only on Centos, RedHat builds only on RedHat. Secondly, for Fedora, they will also be bound to the specific Fedora release. This is because different releases of Fedora may have significant changes made in some of the required packages and libraries. + + +{! installation/further_reading.include !} + +{! support.include !} -- 2.45.2