From 11ec4e1b8f596f67713e94171832fb01e0bc15db Mon Sep 17 00:00:00 2001 From: Stefan Date: Fri, 16 Dec 2022 17:23:31 +0100 Subject: [PATCH] clean-up docs to avoid mismatches in BE and FE. Clearly state that stable-versions are installed --- docs/docs/administration/CLI_tasks/frontend.md | 6 +++--- docs/docs/administration/updating.md | 4 ++-- docs/docs/installation/alpine_linux_en.md | 6 +++--- docs/docs/installation/arch_linux_en.md | 6 +++--- docs/docs/installation/debian_based_en.md | 6 +++--- docs/docs/installation/fedora_based_en.md | 6 +++--- docs/docs/installation/otp_redhat_en.md | 2 +- docs/docs/installation/verifying_otp_releases.md | 2 +- 8 files changed, 19 insertions(+), 19 deletions(-) diff --git a/docs/docs/administration/CLI_tasks/frontend.md b/docs/docs/administration/CLI_tasks/frontend.md index 5e87f1227..382ac268e 100644 --- a/docs/docs/administration/CLI_tasks/frontend.md +++ b/docs/docs/administration/CLI_tasks/frontend.md @@ -24,20 +24,20 @@ Currently, known `` values are: You can still install frontends that are not configured, see below. -## Example installations for a known frontend +## Example installations for a known frontend (Stable-Version) For a frontend configured under the `available` key, it's enough to install it by name. === "OTP" ```sh - ./bin/pleroma_ctl frontend install pleroma-fe + ./bin/pleroma_ctl frontend install pleroma-fe --ref stable ``` === "From Source" ```sh - mix pleroma.frontend install pleroma-fe + mix pleroma.frontend install pleroma-fe --ref stable ``` This will download the latest build for the pre-configured `ref` and install it. It can then be configured as the one of the served frontends in the config file (see `primary` or `admin`). diff --git a/docs/docs/administration/updating.md b/docs/docs/administration/updating.md index 52979a1f5..9f11e40b7 100644 --- a/docs/docs/administration/updating.md +++ b/docs/docs/administration/updating.md @@ -1,6 +1,6 @@ # Updating your instance -You should **always check the [release notes/changelog](https://akkoma.dev/AkkomaGang/akkoma/src/branch/develop/CHANGELOG.md)** in case there are config deprecations, special update steps, etc. +You should **always check the [release notes/changelog](https://akkoma.dev/AkkomaGang/akkoma/src/branch/stable/CHANGELOG.md)** in case there are config deprecations, special update steps, etc. Besides that, doing the following is generally enough: ## Switch to the akkoma user @@ -57,7 +57,7 @@ sudo systemctl stop akkoma # Run database migrations mix ecto.migrate -# Update frontend(s). See Frontend Configration doc for more information. +# Update Pleroma-FE frontend to latest stable. For other Frontends see Frontend Configration doc for more information. mix pleroma.frontend install pleroma-fe --ref stable # Start akkoma (replace with your system service manager's equivalent if different) diff --git a/docs/docs/installation/alpine_linux_en.md b/docs/docs/installation/alpine_linux_en.md index aae8f9626..bdfb96d77 100644 --- a/docs/docs/installation/alpine_linux_en.md +++ b/docs/docs/installation/alpine_linux_en.md @@ -84,12 +84,12 @@ doas adduser -S -s /bin/false -h /opt/akkoma -H -G akkoma akkoma **Note**: To execute a single command as the Akkoma system user, use `doas -u akkoma command`. You can also switch to a shell by using `doas -su akkoma`. If you don’t have and want `doas` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell. -* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory: +* Git clone the AkkomaBE repository from stable-branch and make the Akkoma user the owner of the directory: ```shell doas mkdir -p /opt/akkoma doas chown -R akkoma:akkoma /opt/akkoma -doas -u akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma +doas -u akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git -b stable /opt/akkoma ``` * Change to the new directory: @@ -109,7 +109,7 @@ doas -u akkoma mix deps.get * This may take some time, because parts of akkoma get compiled first. * After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`. -* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances): +* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances): ```shell doas -u akkoma mv config/{generated_config.exs,prod.secret.exs} diff --git a/docs/docs/installation/arch_linux_en.md b/docs/docs/installation/arch_linux_en.md index 639c9c798..300a5d80f 100644 --- a/docs/docs/installation/arch_linux_en.md +++ b/docs/docs/installation/arch_linux_en.md @@ -75,12 +75,12 @@ sudo useradd -r -s /bin/false -m -d /var/lib/akkoma -U akkoma **Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell. -* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory: +* Git clone the AkkomaBE repository from stable-branch and make the Akkoma user the owner of the directory: ```shell sudo mkdir -p /opt/akkoma sudo chown -R akkoma:akkoma /opt/akkoma -sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma +sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git -b stable /opt/akkoma ``` * Change to the new directory: @@ -100,7 +100,7 @@ sudo -Hu akkoma mix deps.get * This may take some time, because parts of akkoma get compiled first. * After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`. -* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances): +* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances): ```shell sudo -Hu akkoma mv config/{generated_config.exs,prod.secret.exs} diff --git a/docs/docs/installation/debian_based_en.md b/docs/docs/installation/debian_based_en.md index 139c789bc..265658fef 100644 --- a/docs/docs/installation/debian_based_en.md +++ b/docs/docs/installation/debian_based_en.md @@ -49,12 +49,12 @@ sudo useradd -r -s /bin/false -m -d /var/lib/akkoma -U akkoma **Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell. -* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory: +* Git clone the AkkomaBE repository from stable-branch and make the Akkoma user the owner of the directory: ```shell sudo mkdir -p /opt/akkoma sudo chown -R akkoma:akkoma /opt/akkoma -sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma +sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git -b stable /opt/akkoma ``` * Change to the new directory: @@ -74,7 +74,7 @@ sudo -Hu akkoma mix deps.get * This may take some time, because parts of akkoma get compiled first. * After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`. -* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances): +* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances): ```shell sudo -Hu akkoma mv config/{generated_config.exs,prod.secret.exs} diff --git a/docs/docs/installation/fedora_based_en.md b/docs/docs/installation/fedora_based_en.md index d8c7b3e74..a24a870a4 100644 --- a/docs/docs/installation/fedora_based_en.md +++ b/docs/docs/installation/fedora_based_en.md @@ -74,12 +74,12 @@ sudo useradd -r -s /bin/false -m -d /var/lib/akkoma -U akkoma **Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell. -* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory: +* Git clone the AkkomaBE repository from stable-branch and make the Akkoma user the owner of the directory: ```shell sudo mkdir -p /opt/akkoma sudo chown -R akkoma:akkoma /opt/akkoma -sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma +sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git -b stable /opt/akkoma ``` * Change to the new directory: @@ -99,7 +99,7 @@ sudo -Hu akkoma mix deps.get * This may take some time, because parts of akkoma get compiled first. * After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`. -* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances): +* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances): ```shell sudo -Hu akkoma mv config/{generated_config.exs,prod.secret.exs} diff --git a/docs/docs/installation/otp_redhat_en.md b/docs/docs/installation/otp_redhat_en.md index ec6c30bcf..1490d3139 100644 --- a/docs/docs/installation/otp_redhat_en.md +++ b/docs/docs/installation/otp_redhat_en.md @@ -37,7 +37,7 @@ sudo dnf install git gcc g++ erlang elixir erlang-os_mon erlang-eldap erlang-xme ```shell cd ~ -git clone https://akkoma.dev/AkkomaGang/akkoma.git +git clone https://akkoma.dev/AkkomaGang/akkoma.git -b stable ``` * Change to the new directory: diff --git a/docs/docs/installation/verifying_otp_releases.md b/docs/docs/installation/verifying_otp_releases.md index 5f1ac6949..6e3c6f8ca 100644 --- a/docs/docs/installation/verifying_otp_releases.md +++ b/docs/docs/installation/verifying_otp_releases.md @@ -12,7 +12,7 @@ Release URLs will always be of the form https://akkoma-updates.s3-website.fr-par.scw.cloud/{branch}/akkoma-{flavour}.zip ``` -Where branch is usually `stable` or `develop`, and `flavour` is +Where branch is usually `stable` and `flavour` is the one [that you detect on install](../otp_en/#detecting-flavour). So, for an AMD64 stable install, your update URL will be -- 2.45.2