# Pleroma
-## Installation
-
-### Dependencies
-
-* Postgresql version 9.6 or newer
-* Elixir version 1.4 or newer
-* NodeJS LTS
-* Build-essential tools
-
-#### Installing dependencies on Debian system
-PostgreSQL 9.6 should be available on Debian stable (Jessie) from "main" area. Install it using apt: `apt install postgresql-9.6`. Make sure that older versions are not installed since Debian allows multiple versions to coexist but still runs only one version.
-
-You must install elixir 1.4+ from elixir-lang.org, because Debian repos only have 1.3.x version. You will need to add apt repo to sources.list(.d) and import GPG key. Follow instructions here: https://elixir-lang.org/install.html#unix-and-unix-like (See "Ubuntu or Debian 7"). This should be valid until Debian updates elixir in their repositories. Package you want is named `elixir`, so install it using `apt install elixir`
-
-Elixir will also require `make` and probably other related software for building dependencies - in case you don't have them, get them via `apt install build-essential`
-
-NodeJS is available as `nodejs` package on Debian. `apt install nodejs`. Debian stable has 4.8.x version. If that does not work, use nodesource's repo https://github.com/nodesource/distributions#deb - version 5.x confirmed to work.
+## About Pleroma
-### Preparation
+Pleroma is an OStatus-compatible social networking server written in Elixir, compatible with GNU Social and Mastodon. It is high-performance and can run on small devices like a Raspberry Pi.
- * You probably want application to run as separte user - so create a new one: `adduser pleroma`, you can login as it via `su pleroma`
- * Clone the git repository into new user's dir (clone as the pleroma user to avoid permissions errors)
- * Again, as new user, install dependencies with `mix deps.get` if it asks you to install "hex" - agree to that.
+For clients it supports both the [GNU Social API with Qvitter extensions](https://twitter-api.readthedocs.io/en/latest/index.html) and the [Mastodon client API](https://github.com/tootsuite/documentation/blob/master/Using-the-API/API.md).
-### Database setup
+Mobile clients that are known to work well:
- * You'll need to allow password-based authorisation for `postgres` superuser
- * Changing default password for superuser is probably a good idea:
- * Open psql shell as postgres user - while being root run `su postgres -c psql`
- * There, enter following:
+* Twidere
+* Tusky
+* Pawoo (Android + iOS)
+* Subway Tooter
+* Amaroq (iOS)
+* Tootdon (Android + iOS)
+* Tootle (iOS)
- ```sql
- ALTER USER postgres with encrypted password '<PASSWORD>';
- ```
+No release has been made yet, but several servers have been online for months already. If you want to run your own server, feel free to contact us at @lain@pleroma.soykaf.com or in our dev chat at #pleroma on freenode or via matrix at https://matrix.heldscal.la/#/room/#freenode_#pleroma:matrix.org.
- where `<PASSWORD>` is any string, no need to manually encrypt it - postgres will encrypt it automatically for you.
- * Replace password in file `config/dev.exs` with password you supplied in previous step (look for line like `password: "postgres"`)
-
- * Edit `/etc/postgresql/9.6/main/pg_hba.conf` (Assuming you have the 9.6 version) and change the line:
+## Installation
- ```
- local all postgres peer
- ```
+### Docker
- to
+While we don't provide docker files, other people have written very good ones. Take a look at https://github.com/Angristan/dockerfiles/tree/master/pleroma or https://github.com/sn0w/pleroma-docker.
- ```
- local all postgres md5
- ```
+### Dependencies
- don't forget to revert it in the later step so you won't have to enter password when accessing psql console.
- * Create and update your database with `mix ecto.create && mix ecto.migrate`. If it gives errors, try running again, this is a known issue.
- * Undo changes you made in `/etc/postgresql/9.6/main/pg_hba.conf` (replace `md5` with `peer`)
- * You most likely don't want having some application accessing database as a superuser, so you should create separate user for Pleroma. Right now it must be done manually (issue #27).
- * Open psql shell as postgres user: (as root) `su postgres -c psql`
- * Create a new PostgreSQL user:
+* Postgresql version 9.6 or newer
+* Elixir version 1.5 or newer. If your distribution only has an old version available, check [Elixir's install page](https://elixir-lang.org/install.html) or use a tool like [asdf](https://github.com/asdf-vm/asdf).
+* Build-essential tools
- ```sql
- \c pleroma_dev
- CREATE user pleroma;
- ALTER user pleroma with encrypted password '<your password>';
- GRANT ALL ON ALL tables IN SCHEMA public TO pleroma;
- GRANT ALL ON ALL sequences IN SCHEMA public TO pleroma;
- ```
+### Configuration
- * Again, change password in `config/dev.exs`, and change user to `"pleroma"` (line like `username: "postgres"`)
+ * Run `mix deps.get` to install elixir dependencies.
-### Some additional configuration
+ * Run `mix generate_config`. This will ask you a few questions about your instance and generate a configuration file in `config/generated_config.exs`. Check that and copy it to either `config/dev.secret.exs` or `config/prod.secret.exs`. It will also create a `config/setup_db.psql`; you may want to double-check this file in case you wanted a different username, or database name than the default. Then you need to run the script as PostgreSQL superuser (i.e. `sudo su postgres -c "psql -f config/setup_db.psql"`). It will create a pleroma db user, database and will setup needed extensions that need to be set up. Postgresql super-user privileges are only needed for this step.
- * You will need to let pleroma instance to know what hostname/url it's running on.
+ * For these next steps, the default will be to run pleroma using the dev configuration file, `config/dev.secret.exs`. To run them using the prod config file, prefix each command at the shell with `MIX_ENV=prod`. For example: `MIX_ENV=prod mix phx.server`. Documentation for the config can be found at [``config/config.md``](config/config.md)
- In file `config/dev.exs`, add these lines at the end of the file:
+ * Run `mix ecto.migrate` to run the database migrations. You will have to do this again after certain updates.
- ```elixir
- config :pleroma, Pleroma.Web.Endpoint,
- url: [host: "example.tld", scheme: "https", port: 443]
- ```
+ * You can check if your instance is configured correctly by running it with `mix phx.server` and checking the instance info endpoint at `/api/v1/instance`. If it shows your uri, name and email correctly, you are configured correctly. If it shows something like `localhost:4000`, your configuration is probably wrong, unless you are running a local development setup.
- replacing `example.tld` with your (sub)domain
-
* The common and convenient way for adding HTTPS is by using Nginx as a reverse proxy. You can look at example Nginx configuration in `installation/pleroma.nginx`. If you need TLS/SSL certificates for HTTPS, you can look get some for free with letsencrypt: https://letsencrypt.org/
- On Debian you can use `certbot` package and command to manage letsencrypt certificates.
-
- * [Not tested with system reboot yet!] You'll also want to set up Pleroma to be run as a systemd service. Example .service file can be found in `installation/pleroma.service` you can put it in `/etc/systemd/system/`.
+ The simplest way to obtain and install a certificate is to use [Certbot.](https://certbot.eff.org) Depending on your specific setup, certbot may be able to get a certificate and configure your web server automatically.
## Running
-By default, it listens on port 4000 (TCP), so you can access it on http://localhost:4000/ (if you it on same machine). In case of an error it will restart automatically.
+* By default, it listens on port 4000 (TCP), so you can access it on http://localhost:4000/ (if you are on the same machine). In case of an error it will restart automatically.
+
+### Frontends
+Pleroma comes with two frontends. The first one, Pleroma FE, can be reached by normally visiting the site. The other one, based on the Mastodon project, can be found by visiting the /web path of your site.
### As systemd service (with provided .service file)
+Example .service file can be found in `installation/pleroma.service` you can put it in `/etc/systemd/system/`.
Running `service pleroma start`
Logs can be watched by using `journalctl -fu pleroma.service`
+### As OpenRC service (with provided RC file)
+Copy ``installation/init.d/pleroma`` to ``/etc/init.d/pleroma``.
+You can add it to the services ran by default with:
+``rc-update add pleroma``
+
### Standalone/run by other means
Run `mix phx.server` in repository's root, it will output log into stdout/stderr
-# Phoenix info
+### Using an upstream proxy for federation
+
+Add the following to your `dev.secret.exs` or `prod.secret.exs` if you want to proxify all http requests that pleroma makes to an upstream proxy server:
+
+ config :pleroma, :http,
+ proxy_url: "127.0.0.1:8123"
+
+This is useful for running pleroma inside Tor or i2p.
-Ready to run in production? Please [check our deployment guides](http://www.phoenixframework.org/docs/deployment).
+## Troubleshooting
-## Learn more
+### No incoming federation
- * Official website: http://www.phoenixframework.org/
- * Guides: http://phoenixframework.org/docs/overview
- * Docs: https://hexdocs.pm/phoenix
- * Mailing list: http://groups.google.com/group/phoenix-talk
- * Source: https://github.com/phoenixframework/phoenix
+Check that you correctly forward the "host" header to backend. It is needed to validate signatures.