X-Git-Url: http://git.squeep.com/?a=blobdiff_plain;f=installation%2Fpleroma.nginx;h=a3d55e4bff785db6bb9a8b88c5e4af67f1f553e3;hb=6c8d15da110e86f799052c82df8b7b2404f8f722;hp=b6ca30cc93817c9be42f487787d955ce5f6c220f;hpb=c41012053a6eb3e190f8ae69ad26db184d3555d2;p=akkoma

diff --git a/installation/pleroma.nginx b/installation/pleroma.nginx
index b6ca30cc9..a3d55e4bf 100644
--- a/installation/pleroma.nginx
+++ b/installation/pleroma.nginx
@@ -10,31 +10,43 @@ proxy_cache_path /tmp/pleroma-media-cache levels=1:2 keys_zone=pleroma_media_cac
                  inactive=720m use_temp_path=off;
 
 server {
-    listen         80;
     server_name    example.tld;
+    listen         80;
     return         301 https://$server_name$request_uri;
 
     # Uncomment this if you need to use the 'webroot' method with certbot. Make sure
-    # that you also create the .well-known/acme-challenge directory structure in pleroma/priv/static and
-    # that is is accessible by the webserver. You may need to load this file with the ssl
-    # server block commented out, run certbot to get the certificate, and then uncomment it.
+    # that the directory exists and that it is accessible by the webserver. If you followed
+    # the guide, you already ran 'sudo mkdir -p /var/lib/letsencrypt' to create the folder.
+    # You may need to load this file with the ssl server block commented out, run certbot
+    # to get the certificate, and then uncomment it.
     #
     # location ~ /\.well-known/acme-challenge {
-    #     root <path to install>/pleroma/priv/static/;
+    #     root /var/lib/letsencrypt/.well-known/acme-challenge;
     # }
 }
 
+# Enable SSL session caching for improved performance
+ssl_session_cache shared:ssl_session_cache:10m;
+
 server {
     listen 443 ssl http2;
-    ssl on;
     ssl_session_timeout 5m;
 
+    ssl_trusted_certificate   /etc/letsencrypt/live/example.tld/fullchain.pem;
     ssl_certificate           /etc/letsencrypt/live/example.tld/fullchain.pem;
     ssl_certificate_key       /etc/letsencrypt/live/example.tld/privkey.pem;
 
-    ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
-    ssl_ciphers "HIGH:!aNULL:!MD5 or HIGH:!aNULL:!MD5:!3DES";
+    # Add TLSv1.0 to support older devices
+    ssl_protocols TLSv1.2;
+    # Uncomment line below if you want to support older devices (Before Android 4.4.2, IE 8, etc.)
+    # ssl_ciphers "HIGH:!aNULL:!MD5 or HIGH:!aNULL:!MD5:!3DES";
+    ssl_ciphers "ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:!aNULL:!eNULL:!EXPORT:!DES:!MD5:!PSK:!RC4";
     ssl_prefer_server_ciphers on;
+    # In case of an old server with an OpenSSL version of 1.0.2 or below,
+    # leave only prime256v1 or comment out the following line.
+    ssl_ecdh_curve X25519:prime256v1:secp384r1:secp521r1;
+    ssl_stapling on;
+    ssl_stapling_verify on;
 
     server_name example.tld;
 
@@ -49,27 +61,6 @@ server {
     client_max_body_size 16m;
 
     location / {
-        # if you do not want remote frontends to be able to access your Pleroma backend
-        # server, remove these lines.
-        add_header 'Access-Control-Allow-Origin' '*' always;
-        add_header 'Access-Control-Allow-Methods' 'POST, PUT, DELETE, GET, PATCH, OPTIONS' always;
-        add_header 'Access-Control-Allow-Headers' 'Authorization, Content-Type, Idempotency-Key' always;
-        add_header 'Access-Control-Expose-Headers' 'Link, X-RateLimit-Reset, X-RateLimit-Limit, X-RateLimit-Remaining, X-Request-Id' always;
-        if ($request_method = OPTIONS) {
-            return 204;
-        }
-        # stop removing lines here.
-
-        add_header X-XSS-Protection "1; mode=block";
-        add_header X-Permitted-Cross-Domain-Policies none;
-        add_header X-Frame-Options DENY;
-        add_header X-Content-Type-Options nosniff;
-        add_header Referrer-Policy same-origin;
-        add_header X-Download-Options noopen;
-        
-        # Uncomment this only after you get HTTPS working.
-        # add_header Strict-Transport-Security "max-age=31536000; includeSubDomains";
-
         proxy_http_version 1.1;
         proxy_set_header Upgrade $http_upgrade;
         proxy_set_header Connection "upgrade";
@@ -80,9 +71,19 @@ server {
         client_max_body_size 16m;
     }
 
-    location /proxy {
+    location ~ ^/(media|proxy) {
         proxy_cache pleroma_media_cache;
+        slice              1m;
+        proxy_cache_key    $host$uri$is_args$args$slice_range;
+        proxy_set_header   Range $slice_range;
+        proxy_http_version 1.1;
+        proxy_cache_valid  200 206 301 304 1h;
         proxy_cache_lock on;
+        proxy_ignore_client_abort on;
+        proxy_buffering on;
+        chunked_transfer_encoding on;
+        proxy_ignore_headers Cache-Control;
+        proxy_hide_header Cache-Control;
         proxy_pass http://localhost:4000;
     }
 }