inactive=720m use_temp_path=off;
server {
- listen 80;
server_name example.tld;
+ listen [::]:80;
return 301 https://$server_name$request_uri;
# Uncomment this if you need to use the 'webroot' method with certbot. Make sure
- # that you also create the .well-known/acme-challenge directory structure in pleroma/priv/static and
- # that is is accessible by the webserver. You may need to load this file with the ssl
- # server block commented out, run certbot to get the certificate, and then uncomment it.
+ # that the directory exists and that it is accessible by the webserver. If you followed
+ # the guide, you already ran 'sudo mkdir -p /var/lib/letsencrypt' to create the folder.
+ # You may need to load this file with the ssl server block commented out, run certbot
+ # to get the certificate, and then uncomment it.
#
# location ~ /\.well-known/acme-challenge {
- # root <path to install>/pleroma/priv/static/;
+ # root /var/lib/letsencrypt/.well-known/acme-challenge;
# }
}
ssl_session_cache shared:ssl_session_cache:10m;
server {
- listen 443 ssl http2;
- ssl on;
+ listen [::]:443 ssl http2;
ssl_session_timeout 5m;
ssl_trusted_certificate /etc/letsencrypt/live/example.tld/fullchain.pem;
ssl_certificate /etc/letsencrypt/live/example.tld/fullchain.pem;
ssl_certificate_key /etc/letsencrypt/live/example.tld/privkey.pem;
+ # Add TLSv1.0 to support older devices
ssl_protocols TLSv1.2;
# Uncomment line below if you want to support older devices (Before Android 4.4.2, IE 8, etc.)
# ssl_ciphers "HIGH:!aNULL:!MD5 or HIGH:!aNULL:!MD5:!3DES";
ssl_ciphers "ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:!aNULL:!eNULL:!EXPORT:!DES:!MD5:!PSK:!RC4";
ssl_prefer_server_ciphers on;
+ # In case of an old server with an OpenSSL version of 1.0.2 or below,
+ # leave only prime256v1 or comment out the following line.
ssl_ecdh_curve X25519:prime256v1:secp384r1:secp521r1;
ssl_stapling on;
ssl_stapling_verify on;
-
+
server_name example.tld;
gzip_vary on;
client_max_body_size 16m;
location / {
- # if you do not want remote frontends to be able to access your Pleroma backend
- # server, remove these lines.
- add_header 'Access-Control-Allow-Origin' '*' always;
- add_header 'Access-Control-Allow-Methods' 'POST, PUT, DELETE, GET, PATCH, OPTIONS' always;
- add_header 'Access-Control-Allow-Headers' 'Authorization, Content-Type, Idempotency-Key' always;
- add_header 'Access-Control-Expose-Headers' 'Link, X-RateLimit-Reset, X-RateLimit-Limit, X-RateLimit-Remaining, X-Request-Id' always;
- if ($request_method = OPTIONS) {
- return 204;
- }
- # stop removing lines here.
-
- add_header X-XSS-Protection "1; mode=block";
- add_header X-Permitted-Cross-Domain-Policies none;
- add_header X-Frame-Options DENY;
- add_header X-Content-Type-Options nosniff;
- add_header Referrer-Policy same-origin;
- add_header X-Download-Options noopen;
-
- # Uncomment this only after you get HTTPS working.
- # add_header Strict-Transport-Security "max-age=31536000; includeSubDomains";
-
proxy_http_version 1.1;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection "upgrade";
client_max_body_size 16m;
}
- location /proxy {
+ location ~ ^/(media|proxy) {
proxy_cache pleroma_media_cache;
+ slice 1m;
+ proxy_cache_key $host$uri$is_args$args$slice_range;
+ proxy_set_header Range $slice_range;
+ proxy_http_version 1.1;
+ proxy_cache_valid 200 206 301 304 1h;
proxy_cache_lock on;
proxy_ignore_client_abort on;
+ proxy_buffering on;
+ chunked_transfer_encoding on;
+ proxy_ignore_headers Cache-Control;
+ proxy_hide_header Cache-Control;
proxy_pass http://localhost:4000;
}
}