# Installing on Debian Based Distributions
+
+{! backend/installation/otp_vs_from_source_source.include !}
+
## Installation
-This guide will assume you are on Debian 11 (“bullseye”) or later. This guide should also work with Ubuntu 18.04 (“Bionic Beaver”) and later. It also assumes that you have administrative rights, either as root or a user with [sudo permissions](https://www.digitalocean.com/community/tutorials/how-to-add-delete-and-grant-sudo-privileges-to-users-on-a-debian-vps). If you want to run this guide with root, ignore the `sudo` at the beginning of the lines, unless it calls a user like `sudo -Hu pleroma`; in this case, use `su <username> -s $SHELL -c 'command'` instead.
+This guide will assume you are on Debian 11 (“bullseye”) or later. This guide should also work with Ubuntu 18.04 (“Bionic Beaver”) and later. It also assumes that you have administrative rights, either as root or a user with [sudo permissions](https://www.digitalocean.com/community/tutorials/how-to-add-delete-and-grant-sudo-privileges-to-users-on-a-debian-vps). If you want to run this guide with root, ignore the `sudo` at the beginning of the lines, unless it calls a user like `sudo -Hu akkoma`; in this case, use `su <username> -s $SHELL -c 'command'` instead.
{! backend/installation/generic_dependencies.include !}
sudo apt install imagemagick ffmpeg libimage-exiftool-perl
```
-### Install PleromaBE
+### Install AkkomaBE
-* Add a new system user for the Pleroma service:
+* Add a new system user for the Akkoma service:
```shell
-sudo useradd -r -s /bin/false -m -d /var/lib/pleroma -U pleroma
+sudo useradd -r -s /bin/false -m -d /var/lib/akkoma -U akkoma
```
-**Note**: To execute a single command as the Pleroma system user, use `sudo -Hu pleroma command`. You can also switch to a shell by using `sudo -Hu pleroma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l pleroma -s $SHELL -c 'command'` and `su -l pleroma -s $SHELL` for starting a shell.
+**Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
-* Git clone the PleromaBE repository and make the Pleroma user the owner of the directory:
+* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory:
```shell
-sudo mkdir -p /opt/pleroma
-sudo chown -R pleroma:pleroma /opt/pleroma
-sudo -Hu pleroma git clone -b stable https://git.pleroma.social/pleroma/pleroma /opt/pleroma
+sudo mkdir -p /opt/akkoma
+sudo chown -R akkoma:akkoma /opt/akkoma
+sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma
```
* Change to the new directory:
```shell
-cd /opt/pleroma
+cd /opt/akkoma
```
-* Install the dependencies for Pleroma and answer with `yes` if it asks you to install `Hex`:
+* Install the dependencies for Akkoma and answer with `yes` if it asks you to install `Hex`:
```shell
-sudo -Hu pleroma mix deps.get
+sudo -Hu akkoma mix deps.get
```
-* Generate the configuration: `sudo -Hu pleroma MIX_ENV=prod mix pleroma.instance gen`
+* Generate the configuration: `sudo -Hu akkoma MIX_ENV=prod mix pleroma.instance gen`
* Answer with `yes` if it asks you to install `rebar3`.
- * This may take some time, because parts of pleroma get compiled first.
+ * This may take some time, because parts of akkoma get compiled first.
* After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
-* Check the configuration and if all looks right, rename it, so Pleroma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
+* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
```shell
-sudo -Hu pleroma mv config/{generated_config.exs,prod.secret.exs}
+sudo -Hu akkoma mv config/{generated_config.exs,prod.secret.exs}
```
* Now run the database migration:
```shell
-sudo -Hu pleroma MIX_ENV=prod mix ecto.migrate
+sudo -Hu akkoma MIX_ENV=prod mix ecto.migrate
```
-* Now you can start Pleroma already
+* Now you can start Akkoma already
```shell
-sudo -Hu pleroma MIX_ENV=prod mix phx.server
+sudo -Hu akkoma MIX_ENV=prod mix phx.server
```
### Finalize installation
-If you want to open your newly installed instance to the world, you should run nginx or some other webserver/proxy in front of Pleroma and you should consider to create a systemd service file for Pleroma.
+If you want to open your newly installed instance to the world, you should run nginx or some other webserver/proxy in front of Akkoma and you should consider to create a systemd service file for Akkoma.
#### Nginx
* Copy the example nginx configuration and activate it:
```shell
-sudo cp /opt/pleroma/installation/pleroma.nginx /etc/nginx/sites-available/pleroma.nginx
-sudo ln -s /etc/nginx/sites-available/pleroma.nginx /etc/nginx/sites-enabled/pleroma.nginx
+sudo cp /opt/akkoma/installation/nginx/akkoma.nginx /etc/nginx/sites-available/akkoma.nginx
+sudo ln -s /etc/nginx/sites-available/akkoma.nginx /etc/nginx/sites-enabled/akkoma.nginx
```
* Before starting nginx edit the configuration and change it to your needs (e.g. change servername, change cert paths)
#### Other webserver/proxies
-You can find example configurations for them in `/opt/pleroma/installation/`.
+You can find example configurations for them in `/opt/akkoma/installation/`.
#### Systemd service
* Copy example service file
```shell
-sudo cp /opt/pleroma/installation/pleroma.service /etc/systemd/system/pleroma.service
+sudo cp /opt/akkoma/installation/akkoma.service /etc/systemd/system/akkoma.service
```
* Edit the service file and make sure that all paths fit your installation
-* Enable and start `pleroma.service`:
+* Enable and start `akkoma.service`:
```shell
-sudo systemctl enable --now pleroma.service
+sudo systemctl enable --now akkoma.service
```
#### Create your first user
If your instance is up and running, you can create your first user with administrative rights with the following task:
```shell
-sudo -Hu pleroma MIX_ENV=prod mix pleroma.user new <username> <your@emailaddress> --admin
+sudo -Hu akkoma MIX_ENV=prod mix pleroma.user new <username> <your@emailaddress> --admin
```
#### Further reading
{! backend/installation/further_reading.include !}
-## Questions
-
-Questions about the installation or didn’t it work as it should be, ask in [#pleroma:libera.chat](https://matrix.to/#/#pleroma:libera.chat) via Matrix or **#pleroma** on **libera.chat** via IRC.
+{! backend/support.include !}
projects / akkoma / blobdiff